 | Item Code: B016IRIO4M Condition: New Save 3% $54.99 Buy now |
This single add-on camera is not paired to your existing system, so if you want to add this camera to your existing system, or replace the camera in your existing system, you need manually pair this single add-on camera to your NVR to make it work. Please contact xmartO support for detailed instructions if you can not get it work. Note: This dome camera is not PTZ, thus can not pan and tilt. This camera is add-on camera for xmartO WOS series wireless security camera system. The wireless weather resistant camera has 15 infrared LED that allow you to see up to 50ft in the darkness. Ideal for monitoring what matters most. Camera Specifications * 1/3" Progressive Scan Sensor, 960p (1280 x 960) high definition @ 25fps real time, equals a 720p IP camera + a 700TVL camera * 4mm lens allows you to see wider * 15 infrared LEDs allow the camera to see up to 50ft in the darkness. Minimum illumination: Color: 0.1 Lux; B/W: 0.01 Lux * White Balance: Auto * Day & Night: Auto switch Color/ BW * S/N: ＞39.1 Db * WiFi: 802.11b/g/n * Anti-thunder Level: Standard IEC61000-4-5 * Working Temperature/Humidity: -4°F-140°F / 20% to 90% RH * Mounting: Ideal for mounting in the ceiling * Power Input: DC 12V-1A, Power consumption: ≤6W * Size: 4.13"(L)×4.13(W)×3.15"(H) * Weight: 0.88lbs NOTE: The WD1324 dome camera is metal base with weatherproof dome; yet the mounting screw holes on the bottom could let water in. Please do not mount this camera outdoor unless you can secure the screw holes from rain. Package Includes * 1x 960p(1280x960) HD Indoor Night Vision Wireless IP Camera * 1x 12V 1A DC Power Adapter Compatible List * NVR: WNO14, WNO18, WNV14, WNV18, WNP24 * Kit: WOS1342, WOS1384, WVS1084; or replace camera of: WOS1344, WOS1384, WOS1388, WVS1044, WPS2044
1.3 Megapixel 960p(1280x960) high definition video and image, 15 infrared LED that allow you to see up to 50ft in the darkness
4mm fixed lens, allows you to see wider, Ideal for mounting in the ceiling, Add-on wireless IP camera for WOS wireless series, only compatible with xmartO wireless system
NOTE : 1.Take the cameras close to the NVR; Install antennas for cameras and NVR, 2.Plug the camera to power using included power adapter, 3.Use a network cable to connect the camera to NVR's LAN port.
4.Right click mouse in your system to enter main menu, then click Device manage (or Video Manage) to enter device manage interface to add your cameras to this new NVR, 5.The above box shows info. of your cameras, the below box shows channel info. of your NVR, 6.Find out your new camera on the above box, select it; if you don't see your new camera, click Refresh.
7.Select an unoccupied channel of your NVR from below box, and click "Match Code". It will take seconds for the camera and NVR to get connected, 8.After it's successfully connected, you should see Status change to "Connect Success" on the channel. Camera information will disappear from above box. Camera is now successfully paired to the system, 9.Then you can unplug and move the camera to anywhere you want. When it gets power, it will automatically reconnect.(camera need to be in the wifi range)
