 | Item Code: B01IYC0LT0 Condition: New Save 20% $59.99 Buy now |
The Raspberry Pi 3 Model B is the latest Raspberry Pi Foundation single board computer with a quad core 64 bit ARMv8 CPU operating at 1.2GHz. It is almost twice as fast as the outgoing Raspberry Pi 2 Model B in many benchmarks.
With the increased performance comes higher power consumption and heat which is why we have paired it with our exclusive heatsink set. This kit will reduce hot spot temperatures by up to 20C and increase the stability of the Raspberry Pi 3 under full CPU load.
Whats included:
- - Raspberry Pi 3 Model B Single Board Computer
- - LoveRPi Clear Case with Screws
- - LoveRPi 8GB MicroSD Card with SD Adapter and Holder
- - LoveRPi 2.5A MicroUSB Power Adapter
- - LoveRPi 10 mm CPU Heatsink with 3M Double-Sided Thermal Adhesive
- - LoveRPi 5 mm LAN Heatsink with 3M Double-Sided Thermal Adhesive
- - LoveRPi 3 Feet Slim Ultra-HD 4K HDMI 2.0 Cable
- - Element14 Quick Start Guide - Element14 Retail Box
- - LoveRPi Troubleshoot Sheet
Please note, this Micro SD card will show up as 56MB in Windows because the Linux partition is hidden by Windows. Only the first partition shows up in Windows unless you view the SD card through Disk Management utility (diskmgmt.msc).
The Raspberry Pi 3 Model B will consume around 1A of current by itself. Secondary accessories can drive up current consumption to 2.5A.
Raspberry Pi is a registered trademark of the Raspberry Pi Foundation. Element 14 is a registered trademark of Premier Farnell. LoveRPi does not represent Raspberry Pi Foundation, Premier Farnell, or 3M.
RASPBERRY PI 3 MODEL B: Single Board Computer with 1.2GHz Quad Core ARM Cortex-A53, 1GB LPDDR2 RAM, Broadcom VideoCore IV GPU, 4 Full Size USB Ports (Shared Bandwidth), 10/100 Mb Ethernet Port, HDMI 1.3 Port, 3.5mm AV Port (Composite Video Out + Stereo Out), MicroSDHC Slot, MIPI CSI Connector for Cameras, MIPI DSI Connector for Displays, 40 Pin GPIO Header, MicroUSB Power Connector
PREVENT THROTTLING WITH HEATSINKS: Tailored Performance Heatsink Set with 10mm Straight Fin High Profile CPU Heatsink and 5mm LAN Heatsink with 3M Thermal Adhesive Tape
MAXIMUM POWER: 5V 2.5A MicroUSB Power Adapter for getting the most from your devices and accessories
LATEST SOFTWARE: 8GB MicroSD Card Optimized for the Raspberry Pi 3 and Flashed with the Latest Raspbian OS
CASE FOR MAKERS: Clear Durable ABS Case provides the all the protection you need while exposing all connectors, ports, and GPIO pins on the board
