 | Item Code: B0086SQDMM Condition: New Save 0% $39.95 Buy now |
Our Best Selling PoE injector
• proven reliability since 2011
• 10/100 data rate
• adds PoE to any Switch
• see also our gigabit and rackmount versions
• power 8 Cameras, WiFi AP's or IP Phones with 60 watts total power
• power any 802.3af device
• power any 12v,PoE device (see our video for info)
• Wall mount version
• 8 data in, 8 data + PoE out
• this is not a switch - you use it to add PoE to any switch or router
• extend power to 328 ft or 100 meters
• power is on all the time. 2.1mm DC connector
Power Supply Included
• 48 volts DC, 1.25 amps, 60 watts
• 110 to 220 volt AC operation
• 90% efficient
• UL, CE and FCC approved
• unique mounting holes
• reversing cable for Cisco 7940 and 7960 is included
Details These devices provide power on the spare data wires in the Ethernet cable. All devices receive the same voltage (48v) - total of all devices is 60 watts. Power is on all the time. Check device specs for power needs, it is under 4 watts for most phones, other devices need more.
Other products from WiFi-Texas
• WS-POES-8-7-48v60w with integrated switch
• WT-GPOE-4-48v48w for gigabit data
• WS-POE-8-48v120w for double the power,
• WS-POE-16-48v60w for double the ports
• WS-GPOE-12-48v120w for gigabit data and high power
• WS-PoE-Tester to display power used by a device
• WT-AF 5 and 12 volt step down converters for non-PoE things
• Full details and data sheet at our web site
Remote power up to 8 Access points, phones or cameras, includes 48 volt 60 watt power supply for 802.3af devices
Passive Power over Ethernet (PoE) technology; power is always on to all 8 outlets
Powers 802.3af devices up to 7.5 watts average each; we also have 120w kits and other products for gigabit speeds
If your device specs "12v, PoE" then this means 12v locally, 48v via the Ethernet - see our video for an explanation
Expert USA Tech Support - call 512 479 0317
